Lenlok Garage Door Kit Rear Fix C4
Description
Tilt-a-Door Lock kits available for either the Lenlok CBS T&L Handles or the Lenlok Economy T Handles. These kits include the handle and the componentry for tilt-a-doors. Note the Lenlok Economy T Handle Kits are only available in a rear fixing model. The components in this kit model are the T handle, 3600mm of cable and cable clamps, two spring latches, an inner access handle, fixing bolts, drive pawl and a handle collar.
LENLOK
Available in 3 wafer barrel series, C4, LF6R and LW3 keyways
C4 keyway available in 5 pin only and are supplied fully assembled
The C4 wafer barrel is available in KA1 to KA10 and KD key codes
LW3 keyway barrel matches in with old series Lenlok T handles
Mastered wafers are available for the LF6R wafer barrel
Clutching handle to prevent lock damage when undue force applied
Interchangeable spindle lengths 75mm, 100mm and 150mm lengths
Handing can be easily changed from 90 degrees clockwise and anticlockwise, and 180 degrees clockwise and anticlockwise
If undue force is applied to the handle whilst the lock is in the locked position, the handle 'snaps off' that leaves the lock in a state where it can no longer be attacked.
Optional key retained feature (roll pins to convert are included)
Flexibility of front fix and rear fixing options (all components supplied).
Personalised customer logos(minimum order quantities apply)
All barrels are supplied with 2 keys
